Is there anything that screams “summer” quite like a daisy? I don’t think so. When I see those white petals and sunny yellow centers, I instantly think of picnics, bare feet in the grass, and not having to wear shoes for three months. It’s basically happiness in flower form.
I’ve always loved daisy jewelry, but buying it? Yikes. Either it costs a fortune, or it looks like it came from a gumball machine. Neither option works for me. So, a few years ago, I decided to figure out how to make my own. And let me tell you, once you start making these, you won’t want to stop.
These cheerful DIY daisy bracelet patterns are perfect for summer. You can whip them up in an evening, wear them to the beach, and give them to all your friends. They’ll think you’re so talented. You don’t have to tell them how easy it actually was. 😉
Getting Started: What You’ll Need
Before we jump into the patterns, let’s talk supplies. Most of these use basic materials you can find at any craft store. You probably already have half of this stuff lurking in a drawer somewhere.
- Embroidery floss: This is your best friend for daisy bracelets. It comes in every color imaginable.
- Seed beads: Tiny little beads in white and yellow work perfectly for daisy patterns.
- Clasps and jump rings: For the more advanced bracelets that need a closure.
- Elastic cord: Because sometimes you just want to slip a bracelet on and go.
- Needle and thread: A thin needle helps with beadwork.
- Scissors and glue: The dynamic duo of any craft project.
Pattern One: The Classic Embroidery Floss Daisy Chain
This is the pattern that started it all for me. It reminds me of making friendship bracelets at summer camp, but with a floral upgrade. It’s also the easiest one to learn, so let’s start here.
What You’ll Need
- Embroidery floss in green and white
- Yellow seed beads
- A small needle (optional, but helpful)
- Tape or a clipboard to hold your work
Let’s Make It
Cut three strands of green floss, each about 24 inches long. Tie them together in a knot at the top, leaving a little tail. Tape that knot to a table or clip it to a clipboard. This is your base.
Now, here’s where the daisy magic happens. You’re going to make a series of loops with the white floss to form each petal. The key is keeping your tension consistent, or your daisies will look wonky. Trust me, I’ve made some very lopsided flowers.
Separate one strand of green floss to be your working thread. Take a separate piece of white floss and fold it in half. Lay the folded end under the green strand, then pull the tails through the loop. Pull tight. You’ve just attached your white floss.
Now, take one white strand and make a loop over the green core strand. Bring the end under and through. Do this five more times to create six loops. These are your petals. Push a yellow seed bead up the green core strand so it sits in the middle of the white loops. Secure it with a knot. Repeat until your bracelet is long enough.
I won’t lie, the first few flowers might look a little rough. Mine certainly did. But by the third one, you’ll be a pro. It’s one of those skills that clicks after a few tries.
Pattern Two: The Beaded Daisy Chain Bracelet
This one uses tiny seed beads to create daisies that are perfectly uniform and have a lovely shimmer. It’s a bit more meditative than the floss version because you’re just repeating the same bead pattern over and over.
What You’ll Need
- Beading needle and thread
- White seed beads
- Yellow seed beads
- Green seed beads
- A clasp of your choice
Let’s Make It
Thread your needle with about 24 inches of beading thread. Tie a stop bead (a separate bead you run through twice) at the end so your other beads don’t fall off. Don’t tie it to the clasp yet.
String on five white beads. These will be your petals. Go back through the first white bead to form a circle. Pull tight. Now you have a ring of five white beads. String on one yellow bead and go through the opposite side of the circle (the third bead) to secure the yellow bead in the center. You’ve just made a daisy!
Now, string on three green beads to create the stem between flowers. Then, start your next daisy by stringing five more white beads and repeating the process. Continue until you reach your desired length, then add your clasp.
This pattern creates a very delicate, dainty bracelet. It looks amazing stacked with other bracelets. I made one in pastel colors, and I wear it with everything.
Pattern Three: The Polymer Clay Daisy Bracelet
Okay, this one requires a little more effort upfront, but the payoff is huge. You get to sculpt your own flowers, which means you can make them any size and color you want. Plus, playing with clay is just fun.
What You’ll Need
- White polymer clay
- Yellow polymer clay
- A toothpick or needle tool
- A baking sheet and oven
- Elastic cord or leather cord
- Scissors
Let’s Make It
Take a small piece of white clay and roll it into a ball. Flatten it slightly into a disc. This is the base of your flower. Take five even smaller pieces of white clay and roll them into tiny teardrops. Arrange them in a circle on your base, points outward, to form the petals. Gently press them down.
Take a tiny ball of yellow clay and press it into the center. Use your toothpick to poke tiny holes in the yellow center to make it look realistic. Bake the flowers according to the package instructions. Let them cool completely before you even think about touching them.
Once they’re cool, you can string them onto elastic cord for a simple stretchy bracelet. Or, use leather cord and tie knots between each flower for a more bohemian look. These chunky clay daisies are my absolute favorite summer accessory.
Pattern Four: The Ribbon and Button Daisy Bracelet
This pattern is for when you want something that looks like it came from a boutique, but you have about fifteen minutes to make it. It uses ribbon and buttons in a way that feels surprisingly sophisticated.
What You’ll Need
- 1/4 inch wide satin ribbon in a color you love
- White buttons with four holes
- Yellow embroidery floss
- Needle
- Scissors
- A lighter (optional, for sealing ribbon ends)
Let’s Make It
Cut a piece of ribbon long enough to wrap around your wrist twice, plus a little extra for tying. Seal the cut ends with a lighter so they don’t fray. Just a quick pass through the flame does the trick.
Now, take a white button. Thread your needle with yellow embroidery floss. Sew through one hole in the button, down through the ribbon, and back up through the next hole, creating little yellow stitches that look like a flower center. Secure it with a few small stitches on the back of the ribbon.
Space your buttons evenly along the ribbon. I usually use three or four. Once all your buttons are attached, you’re done! You just tie it around your wrist like a bow. It’s ridiculously easy and looks incredibly cute.
Pattern Five: The Macrame Daisy Bracelet
Macrame isn’t just for plant hangers! You can use those same knots to create a really cool, textured daisy pattern. This one looks complicated, but it’s actually just a series of simple square knots arranged in a flower shape.
What You’ll Need
- Waxed cotton cord in two colors (I recommend white and green)
- A clipboard to hold your work
- Scissors
- A small bead for the center (optional)
Let’s Make It
Cut four strands of cord, each about 30 inches long. Fold them in half and attach them to your clipboard with a lark’s head knot. You’ll have eight strands to work with.
The daisy is made by taking four of the inner strands and tying a series of square knots to form the petals. The exact pattern is a bit tricky to describe in words, but here’s the gist: you’ll use the two outer strands as your knotting cords and the two inner strands as your fillers.
Tie a square knot. Then, use the next set of strands to tie another square knot right next to it. Once you have a few knots, you can spread them out to form a petal shape. Add a bead in the center if you want.
This bracelet has a great, chunky texture. It’s perfect for wearing to a music festival or a day at the beach. It feels very 70s in the best way possible.
Pattern Six: The Daisy Chain Charm Bracelet
This one combines a simple chain with individual daisy charms you make yourself. It jingles when you move your wrist, and honestly, that’s one of life’s simple pleasures.
What You’ll Need
- A basic chain bracelet (gold or silver tone, whichever you prefer)
- Jump rings
- Jewelry pliers (two pairs are helpful)
- Small daisy charms (you can buy these or make them from clay or metal stamps)
Let’s Make It
If you’re buying your daisy charms, skip ahead. If you’re making them from metal, you’ll need metal stamps and a metal disc. Stamp a daisy shape onto small metal discs. This takes practice, but the imperfect, handmade look is part of the charm.
Open a jump ring using two pairs of pliers. Don’t pull it apart; twist it sideways. Slide your daisy charm onto the jump ring. Slide the jump ring onto a link of your chain. Close the jump ring by twisting it back. Make sure it’s fully closed or your charm will fall off somewhere and you’ll never find it.
Add as many daisies as you want. I like a scattered, random look. You can also add other little charms—a tiny sun, a bee, a heart. Make it your own.
Wear Your Summer Spirit
So there you have it. Six totally doable, totally adorable ways to wear daisies on your wrist all summer long. Whether you’re a bead pro, a clay novice, or a ribbon enthusiast, there’s a pattern here with your name on it.
I love making these while sitting on the porch with a cold drink. It’s my favorite way to unwind. And honestly, nothing beats the feeling of someone asking, “Where did you get that bracelet?” and getting to say, “Oh, I made it.”
So grab some supplies, pick your favorite pattern, and get crafting. Your summer wardrobe is begging for a little floral touch. 🙂
