7 DIY Dandy’s World Crafts for Fans

So, you’re as hooked on Dandy’s World as I am, right? There’s just something about that twisted, colorful world and its cast of Toons that makes you want to bring a piece of it home. Sure, you could buy official merch, but where’s the fun in that? Plus, half the time, the stuff you really want—like a specific character plush or a prop from the maps—doesn’t even exist on a store shelf.

That’s where we come in. I’ve been crafting my own game-inspired gear for years (my bookshelf is basically a shrine to my favorite indie games at this point), and I’ve figured out a few tricks to make it look good without breaking the bank. Whether you’re a seasoned pro with a hot glue gun or a newbie who’s just here for a good time, I’ve got seven awesome Dandy’s World craft projects for you.

Ever wonder how to get that perfect, slightly-off vibe of the Garden View? We’re going to figure it out together. Grab your scissors, and let’s get started.

1. Felt Shrimpo Keychain

Shrimpo is my spirit animal. The little guy is just angry about everything, and honestly? Same. This is probably the easiest project on the list and a perfect starting point. It’s small, requires minimal materials, and you can whip one up in an evening while rewatching your favorite playthrough.

Materials You’ll Need:

• Felt sheets: A peachy-pink color for his body, white for his eyes, and black for his pupils.
• Embroidery floss: Matching pink and black.
• Keychain ring
• Scissors
• Hot glue gun (or fabric glue if you’re patient and hate your fingers)
• Stuffing (just a little bit!)

Let’s Make This Grumpy Guy:

1. Cut Your Shapes: Cut out two identical body shapes from the pink felt. It’s basically a rounded rectangle with little nub arms and legs. No need to be perfect—Shrimpo isn’t exactly a precision character. Then, cut out two small ovals for the white of his eyes and two even smaller circles for his pupils.
2. Make the Face: Arrange the white ovals on one of the body pieces. Once you’re happy, glue or stitch them down. I’m a huge fan of just using hot glue for this because, let’s face it, I have the patience of a squirrel. Then, glue the black pupils on top. Don’t forget his signature angry eyebrows! Just two tiny black slanted lines above his eyes.
3. Stitch it Up: Place your two body pieces together. Start sewing around the edges with your pink thread. Use a simple whip stitch. When you’re about halfway around, pause and add a small handful of stuffing. Don’t overstuff him, or he’ll look like he’s had a nice vacation instead of being eternally grumpy.
4. Add the Ring: Before you sew the final seam closed, fold a short piece of ribbon or string in half and tuck the cut ends inside the top of Shrimpo’s head, with the loop sticking out. Sew over it to secure it firmly. Then, just clip your keychain ring onto the loop.

And there you have it! A tiny, furious friend to clip on your bag. IMO, he’s the best good luck charm.

2. Gloopy Slime Jar (The Icky Kind)

You can’t have Dandy’s World without a little bit of ick. And who represents that better than our goopy friend, Gloopy? This craft is less about precision and more about getting gloriously messy. It’s also a fantastic way to use up those random crafting supplies you have lying around.

Ingredients for the Goop:

• A clean glass jar (a small mason jar or even an old pasta sauce jar works great)
• Clear school glue
• Liquid starch (this is my go-to activator, but contact lens solution with boric acid works too)
• Green food coloring (neon green is best for that toxic waste look)
• Water
• Optional mix-ins: Plastic eyes, tiny plastic spiders, green glitter

Mixing Up Your Own Gloopy:

1. Make the Slime Base: In a bowl, mix about 1/2 cup of clear glue with 1/2 cup of water. Stir it well. Then, add a few drops of your green food coloring. Remember, you can always add more, but you can’t take it away. Start with 3-4 drops. I like mine looking like it could crawl out of the jar on its own.
2. Activate the Slime: Slowly add your liquid starch, about a tablespoon at a time, stirring constantly. You’ll feel the mixture start to pull away from the sides of the bowl and form a solid (well, semi-solid) blob. Stop adding starch when it’s no longer sticky. This is where you have to trust the process!
3. Get Icky: Now for the fun part. Take the slime out and start kneading it with your hands. It’ll be a bit wet at first, but the more you work it, the better it gets.
4. Add the “Gloopy” Bits: This is where you can get creative. Press the plastic eyes and spiders into the slime. Sprinkle in some glitter for that extra magical (and disgusting) shimmer. The goal is to make it look like Gloopy just coughed up a bunch of random stuff from the floor of the Garden View.
5. Jar It Up: Plop your finished slime into the clean jar. Screw the lid on tight. Now you have a desk buddy that’s way more interactive than a regular figure. FYI, if you add too much starch, it’ll get rubbery and less “drippy,” so go easy on it!

3. “Dandy’s World” Reward Stickers

Ever notice how Dandy rewards you with those little star stickers? It’s such a simple but iconic part of the game. Why not make your own to reward yourself for, I don’t know, getting out of bed or finishing a tough level? You can use them to decorate your laptop, water bottle, or a journal.

What You Need:

• Printable sticker paper (you can get this at any office supply store)
• A color printer
• Clear packing tape or self-adhesive laminating sheets (to make them waterproof)
• Scissors

Your Guide to Self-Reward:

1. Design the Stickers: This is the fun part. Open up a simple photo editor (like Canva, which is free and amazing) or even MS Paint. Create a new document the size of your sticker paper.
2. Get the Shapes: The classic Dandy reward is a yellow, five-pointed star. But who says you have to stop there? You can make little Toon silhouettes. A simple black circle for Toodles? A pink blob for Poppy? Get creative! I made a sheet of Shrimpo’s angry face and they’re my absolute favorite.
3. Print and Laminate: Print your design onto the sticker paper. Let the ink dry for a minute. Then, to give them that durable, shiny look, cover the entire printed sheet with clear packing tape or a laminating sheet. This is a crucial step if you want them to last on a water bottle.
4. Cut Them Out: Now for the slightly tedious part. Carefully cut out all your stickers. Put on a podcast or some music, because this takes a minute. But the result? A whole sheet of custom, game-accurate stickers for pennies compared to what you’d pay on Etsy.

4. No-Sew Cosplay Bowtie (Like Dandy’s!)

Dandy’s bowtie is iconic. It’s crisp, it’s a little bit fancy, and it’s the perfect accessory for a convention or even just to wear while you stream the game. And the best part? You don’t need to know how to sew a single stitch.

Grab These Supplies:

• Felt sheet in Dandy’s blue (take a screenshot of the game with you to the craft store to color-match)
• Felt sheet in a contrasting color (maybe yellow for the spots, or just white)
• A plain alligator clip (the kind for hair) or a pin back
• Hot glue gun
• Scissors

Crafting Your Signature Look:

1. Cut the Bowtie Shape: Cut a rectangle from your blue felt. This will be the main body of the bow. The size is up to you, but for a good cosplay look, I’d aim for about 5 inches wide and 3 inches tall. Then, pinch the middle of the rectangle to create that bow-tie shape. It should look like a butterfly with the wings splayed out.
2. Create the Center: Cut a small, thin strip of the same blue felt. This will go around the pinched middle of your bow to hide the pinch and give it that clean, knotted look. Wrap it around the center and glue the ends together at the back. Make sure it’s snug but not so tight that it distorts the bow shape.
3. Add Dandy’s Details: Dandy’s bowtie has those little white (or light-colored) spots on it. Cut out several small circles from your contrasting felt. Arrange them on the front of the bow and glue them down. Don’t make them perfect circles; a little irregularity makes them look more authentic.
4. Attach the Clip: Take your alligator clip or pin back. Glue a small square of felt over the clip’s base and then glue that entire piece onto the back of the bowtie. This gives the glue more surface area to grip. Let it dry completely. Now, clip it on and strike a pose!

5. Garden View Icons Shadow Box

This project is a bit more advanced, but the payoff is huge. It’s like owning a piece of the game itself. A shadow box displaying the key icons from the Garden View—like the elevator button, the main gate, or a twisted flower—makes for incredible room decor. It’s a conversation starter, for sure.

Materials for Your Diorama:

• A deep-set shadow box frame (you can find these at craft stores or even thrift shops for cheap)
• Cardboard or foam board
• Acrylic paint in various colors (greens, yellows, browns, silver)
• Small craft items: Buttons, popsicle sticks, small plastic toys you can modify
• Hot glue gun
• An X-Acto knife (be careful, please!)

Building Your Scene:

1. Plan Your Layout: First, decide which elements you want to feature. I chose the elevator button as my centerpiece. I also made the little glowing lights from the floor and some of the strange foliage.
2. Craft the Elements:
   • The Button: I cut a small circle from foam board, painted it silver, and glued a large, clear red button on top. Then I painted a tiny “V” on it. For the base, I glued a few popsicle sticks together and painted them to look like the metal panel.
   • The Floor Lights: I used small, flat-backed glass marbles from the dollar store. I painted the backs yellow and glued them in a cluster on a small piece of painted cardboard.
   • The Plants: Twisted some green pipe cleaners and glued on small leaves cut from green felt.
3. Paint the Background: Take the back panel of your shadow box. Paint it a deep, gradient blue to mimic the sky. I used a sponge to dab on some lighter blues and purples to give it that dreamy, atmospheric look.
4. Assemble the Box: Arrange your crafted pieces inside the box without gluing them first. Move them around until you find a composition you like. Ever notice how a slight tilt can make a huge difference? Then, start gluing them into place, starting with the back elements and working your way forward.
5. Close It Up: Once the glue is dry, put the front of the shadow box on. Now you have a 3D piece of Dandy’s World that you can hang on your wall. It’s a masterpiece, IMO.

6. Poppy’s Headband

Poppy is adorable, and her little flower hair accessory is just the cutest. This is a quick craft that you can wear or even give as a gift to a fellow fan. It’s simple, cheerful, and instantly recognizable.

What You’ll Need:

• A plain headband (plastic or fabric-covered, whatever you have)
• Felt: Pink, yellow, and a tiny bit of white
• Floral wire (optional, for a bendable stem)
• Hot glue gun
• Scissors

Blooming Steps:

1. Make the Flower: Cut out a simple five-petal flower shape from your pink felt. Then cut a smaller circle from the yellow felt for the center. You could even cut a tiny white highlight circle to glue on the yellow center for a little extra dimension.
2. Create the Stem: This is where you can choose. For a simple look, just cut a long, thin strip of green felt. For a more durable and poseable stem, cut a piece of floral wire and wrap a thin strip of green felt around it, gluing it as you go.
3. Assemble the Flower: Glue the yellow center onto the pink flower. If you made a wire stem, glue the back of the flower securely to one end of the stem. If you’re using a felt stem, just glue it directly to the back of the flower.
4. Attach to Headband: This is the trickiest part. You want the flower to sit upright like Poppy’s. Position the bottom of the stem against the side of the headband. Use a generous amount of hot glue to attach it, and hold it in place for a full 60 seconds until it’s rock solid. You can even wrap a small piece of green felt around the headband and stem for extra hold, covering the glue joint. Now you have a hair accessory that’s totally “you”!

7. Twisted Teacup Planter (Like the Garden View)

The broken teacups in the Garden View are such a great detail. They’re whimsical but also a little sad, which is basically the whole vibe of the game. This craft repurposes an old thrift store teacup into a cute little planter for a small succulent or air plant.

Gather Your “Broken” Items:

• An old teacup and saucer (thrift stores are perfect for this)
• A small hammer
• A towel
• Sandpaper
• Potting soil and a small succulent

Creating Deliberate Imperfection:

1. The “Breaking” Point: This is the nerve-wracking part. Wrap your teacup in an old towel. Take your hammer and give it a gentle tap. The goal isn’t to shatter it, but to chip the rim or maybe crack the handle slightly. You want it to look aged and used, not completely destroyed. I learned this the hard way and ended up with a pile of dust my first time. Go slow!
2. Smooth the Edges: Use your sandpaper to smooth down any sharp edges from the chips. You don’t want to cut yourself every time you water your plant.
3. Arrange the Pieces: Place the teacup on its saucer. Maybe tilt it slightly. You can even glue one of the chips you knocked off back onto the saucer next to the cup, like it fell off.
4. Plant It Up: Put a little gravel or small rocks in the bottom of the cup for drainage. Add some potting soil and then carefully plant your succulent. The green of the plant against the broken ceramic is such a cool, subtle nod to the game. Every time I look at mine on my windowsill, it makes me smile.

So, there you have it. Seven ways to bring a little more Dandy’s World into your real life without spending a ton of cash. Which one are you going to try first? I’m personally eyeing that shadow box project again… maybe I need to make a version for the twisted mansion levels. Drop a comment and let me know which character or item you think needs a DIY tutorial next! Happy crafting!